На главную
Видео добавленное пользователем “DIY Builds”
DIY Dust Collector System with Homemade Blast Gates and Automatic Start/Stop Function
 
11:35
Continuing off with my DIY dust collector cyclone system I added all the duct work to hook up dust collection to my tools. I show how I added dust ports to the router table, drill press, table saw and band saw. The drill press dust collection is via a loc-line system sold by lee valley. I made homemade blast gates from some hardboard and 5/8 melamine particle board. I used a non contact magnet door alarm system to control a low voltage dc relay to control the motor operation when the blast gates are opened and closed. I made free plans for the blast gates on my website (link below) Buy a T-shirt to support the channel: https://teespring.com/stores/diy-builds Visit my website for free plans and see viewer builds: http://diybuilds.ca Follow me on Instagram: https://www.instagram.com/diybuilds Follow me on Facebook: https://www.facebook.com/DIYBuilds Support DIY Builds on Patreon: https://www.patreon.com/DIYBuilds #DIYBuilds #Woodworking #DIY
Просмотров: 556877 DIY Builds
How to Build a Shed (On a Concrete Pad)
 
10:38
This is a simple shed I built for my parents. It is 8ft by 12ft with a 14 inch overhang and 30 degree roof pitch. Buy a T-shirt to support the channel: https://teespring.com/stores/diy-builds Visit my website for free plans and see viewer builds: http://diybuilds.ca Follow me on Instagram: https://www.instagram.com/diybuilds Follow me on Facebook: https://www.facebook.com/DIYBuilds Support DIY Builds on Patreon: https://www.patreon.com/DIYBuilds #DIYBuilds #Woodworking #DIY
Просмотров: 187569 DIY Builds
DIY Pocket Hole Machine
 
11:22
You can download a free set of plans on my website. Using 1 3/4" sheet of melamine particle board, a basic kreg jig and an old drill I created a pocket hole machine. The melamine is used as it is very durable and slippery to easily move to the next hole. The clamping mechanism is a poly caster to keep the build simple. It is set up only to drill pocket holes in 3/4" stock but you could easliy adjust the fence and drill bit to do larger or smaller sizes. Buy a T-shirt to support the channel: https://teespring.com/stores/diy-builds Visit my website for free plans and see viewer builds: http://diybuilds.ca Follow me on Instagram: https://www.instagram.com/diybuilds Follow me on Facebook: https://www.facebook.com/DIYBuilds Support DIY Builds on Patreon: https://www.patreon.com/DIYBuilds #DIYBuilds #Woodworking #DIY
Просмотров: 217082 DIY Builds
DIY Pocket Hole Machine Upgrade / Improvement
 
02:28
After a few people pointed out the obvious to me I decided it was worth fixing the flaw in my original design. I added a removable piece of 1/4" Plexiglas over the drill/bit so you can adjust the stop collar (depth of hole) and remove the bit in the event it breaks or is dull. Buy a T-shirt to support the channel: https://teespring.com/stores/diy-builds Visit my website for free plans and see viewer builds: http://diybuilds.ca Follow me on Instagram: https://www.instagram.com/diybuilds Follow me on Facebook: https://www.facebook.com/DIYBuilds Support DIY Builds on Patreon: https://www.patreon.com/DIYBuilds #DIYBuilds #Woodworking #DIY
Просмотров: 28532 DIY Builds
How to Build a Guitar Stand - That Holds 10 Guitars
 
07:41
My brother asked me to make a guitar stand for all 10 of his guitars. It holds 8 electric guitars and 2 acoustic guitars. It is constructed of 3/4 oak veneer plywood that has been edge banded and stained with chestnut colouring. It uses pocket hole construction and 1/4 sticky back foam for the bumper padding. Visit my website (listed below) for a free set of plans. Buy a T-shirt to support the channel: https://teespring.com/stores/diy-builds Visit my website for free plans and see viewer builds: http://diybuilds.ca Follow me on Instagram: https://www.instagram.com/diybuilds Follow me on Facebook: https://www.facebook.com/DIYBuilds Support DIY Builds on Patreon: https://www.patreon.com/DIYBuilds #DIYBuilds #Woodworking #DIY
Просмотров: 135599 DIY Builds
Miter Saw Station (Plus Tool Storage)
 
06:09
I have a really deep (because of the slider mechanism) miter saw and I wanted to create as little stand off from any wall as possible, because of this I removed my Garage to basement stair case railing and replaced it with a custom miter saw station with plenty of tool storage. Buy a T-shirt to support the channel: https://teespring.com/stores/diy-builds Visit my website for free plans and see viewer builds: http://diybuilds.ca Follow me on Instagram: https://www.instagram.com/diybuilds Follow me on Facebook: https://www.facebook.com/DIYBuilds Support DIY Builds on Patreon: https://www.patreon.com/DIYBuilds #DIYBuilds #Woodworking #DIY
Просмотров: 37197 DIY Builds
Table Saw Lathe Upgrade
 
03:32
I added a few improvements to my table saw lathe that help out with functionality and dust collection capabilities. Buy a T-shirt to support the channel: https://teespring.com/stores/diy-builds Visit my website for free plans and see viewer builds: http://diybuilds1.weebly.com/ Follow me on Instagram: https://www.instagram.com/diybuilds Follow me on Facebook: https://www.facebook.com/DIYBuilds Support DIY Builds on Patreon: https://www.patreon.com/DIYBuilds #DIYBuilds #Woodworking #DIY
Просмотров: 16482 DIY Builds
How to Make Simple and Cheap Shelves for a Shed
 
02:52
Using some 1/2" OSB and some 2x3s I made 3 shelves for my shed. The whoel project cost about $40 Buy a T-shirt to support the channel: https://teespring.com/stores/diy-builds Visit my website for free plans and see viewer builds: http://diybuilds.ca Follow me on Instagram: https://www.instagram.com/diybuilds Follow me on Facebook: https://www.facebook.com/DIYBuilds Support DIY Builds on Patreon: https://www.patreon.com/DIYBuilds #DIYBuilds #Woodworking #DIY
Просмотров: 59484 DIY Builds
How to Build a Drill Press Stand
 
06:45
Using 1 Sheet of 3/4 plywood, 1/8" hardboard for a backer and some pine for edge banding I made up this simple stand/cart for my drill press. It has 2 fixed casters for easy mobility. Check out my website for a free set of plans. Buy a T-shirt to support the channel: https://teespring.com/stores/diy-builds Visit my website for free plans and see viewer builds: http://diybuilds1.weebly.com/ Follow me on Instagram: https://www.instagram.com/diybuilds Follow me on Facebook: https://www.facebook.com/DIYBuilds Support DIY Builds on Patreon: https://www.patreon.com/DIYBuilds #DIYBuilds #Woodworking #DIY
Просмотров: 49746 DIY Builds
How to Build a Wood Spoke Wheel (With a Router Table)
 
05:55
Using some scrap 3/4" pine boards cut down to 8 inch squares and some 3/4" dowels I created a spoke wheel. This technique uses the router table and a 3/4" cove bit to set the spokes in perfect alignment. Support DIY Builds on Patreon: https://www.patreon.com/DIYBuilds Buy a T-shirt to support the channel: https://teespring.com/stores/diy-builds Visit my website for free plans and see viewer builds: http://diybuilds.ca Follow me on Instagram: https://www.instagram.com/diybuilds Follow me on Facebook: https://www.facebook.com/DIYBuilds #DIYBuilds #Woodworking #DIY
Просмотров: 6950 DIY Builds
How to Build a Wooden Mallet on a Table Saw Lathe
 
06:53
I build this wooden mallet out of some scraps of maple and walnut. The mallet was extremely fast and easy to build using my table saw lathe. Buy a T-shirt to support the channel: https://teespring.com/stores/diy-builds Visit my website for free plans and see viewer builds: http://diybuilds.ca Follow me on Instagram: https://www.instagram.com/diybuilds Follow me on Facebook: https://www.facebook.com/DIYBuilds Support DIY Builds on Patreon: https://www.patreon.com/DIYBuilds #DIYBuilds #Woodworking #DIY
Просмотров: 12511 DIY Builds
How to Make a Wooden Beer Mug (Easy Gift Idea)
 
06:15
This is my version of a wooden beer mug that I will be using a a gift for someone this christmas. I used a scrap piece of 1/2 maple that was roughly 9" by 41" to cut a 11 degree angle on 16 pieces of wood cut to approximatly 10" long. Buy a T-shirt to support the channel: https://teespring.com/stores/diy-builds Visit my website for free plans and see viewer builds: http://diybuilds.ca Follow me on Instagram: https://www.instagram.com/diybuilds Follow me on Facebook: https://www.facebook.com/DIYBuilds Support DIY Builds on Patreon: https://www.patreon.com/DIYBuilds #DIYBuilds #Woodworking #DIY
Просмотров: 29900 DIY Builds
How to Build a Cyclone Separator From a Stock Dust Collector
 
10:47
I took a 2hp harbor freight dust collector and added a piece of sheet metal bent into a funnel and added a barrel to the bottom of it to create a diy cyclone dust separator. The unit functions very well. Buy a T-shirt to support the channel: https://teespring.com/stores/diy-builds Visit my website for free plans and see viewer builds: http://diybuilds.ca Follow me on Instagram: https://www.instagram.com/diybuilds Follow me on Facebook: https://www.facebook.com/DIYBuilds Support DIY Builds on Patreon: https://www.patreon.com/DIYBuilds #DIYBuilds #Woodworking #DIY
Просмотров: 110793 DIY Builds
How to Build an Assembly Table / Outfeed Table
 
04:35
This is a super cheap (under $100) assembly /outfeed table made of 2x4s and a 4x8 sheet of 5/8 melamine board. I substituted 4 casters on each leg for 2 solid legs and 2 straight casters as it doesn't move around very often and adds more stability. Visit my website: http://diybuilds1.weebly.com/ Check out my Blog for past projects: http://doityourselfbuilds.blogspot.ca/ Follow me on Instagram: https://www.instagram.com/diybuilds/ Follow me on Facebook: https://www.facebook.com/DIYBuilds Follow me on Twitter: https://twitter.com/DIYBUILDS Support DIY Builds on Patreon: https://www.patreon.com/DIYBuilds #DIYBuilds #Woodworking #DIY
Просмотров: 16762 DIY Builds
Homemade Screw Center for the Wood Lathe
 
02:26
I quickly threw this together from the stock screw plate that come with the lathe and turned it into a screw center. This will be used in conjunction with my table saw lathe which uses the same size 3/8 mounting bolt. Buy a T-shirt to support the channel: https://teespring.com/stores/diy-builds Visit my website for free plans and see viewer builds: http://diybuilds1.weebly.com/ Follow me on Instagram: https://www.instagram.com/diybuilds Follow me on Facebook: https://www.facebook.com/DIYBuilds Support DIY Builds on Patreon: https://www.patreon.com/DIYBuilds #DIYBuilds #Woodworking #DIY
Просмотров: 7068 DIY Builds
How to Build a Table Saw Lathe (Tenoner / Dowel Maker)
 
10:21
I used half a sheet of 3/4 plywood to create this table saw lathe. I will be mostly using it to round out stock and create spindles. It can be used as a tenoner and dowel maker as well. I have a free set of plans available on my website (link below). Buy a T-shirt to support the channel: https://teespring.com/stores/diy-builds Visit my website for free plans and see viewer builds: http://diybuilds.ca Follow me on Instagram: https://www.instagram.com/diybuilds Follow me on Facebook: https://www.facebook.com/DIYBuilds Support DIY Builds on Patreon: https://www.patreon.com/DIYBuilds #DIYBuilds #Woodworking #DIY
Просмотров: 530076 DIY Builds
The Ultimate Router Table Insert Plate - Dust Collection Upgrade
 
02:30
For $40 I had my local Laser CNC machine shop cut my out a 1/4" aluminum plate for a new router table insert plate. I sent them a CAD file that I designed and have made available for free on my website (link below). The plate it 100% flat and incorporates air vents for maximum air flow to collect dust via my 4" dust collector port. Buy a T-shirt to support the channel: https://teespring.com/stores/diy-builds Visit my website for free plans and see viewer builds: http://diybuilds1.weebly.com/ Follow me on Instagram: https://www.instagram.com/diybuilds Follow me on Facebook: https://www.facebook.com/DIYBuilds Support DIY Builds on Patreon: https://www.patreon.com/DIYBuilds #DIYBuilds #Woodworking #DIY
Просмотров: 9937 DIY Builds
Wooden Car and Truck Toys
 
02:55
A quick and cheap wooden toy car and truck made from scrap sections of 2x4 and some small dowels. The finish is mineral oil = baby safe. Buy a T-shirt to support the channel: https://teespring.com/stores/diy-builds Visit my website for free plans and see viewer builds: http://diybuilds.ca Follow me on Instagram: https://www.instagram.com/diybuilds Follow me on Facebook: https://www.facebook.com/DIYBuilds Support DIY Builds on Patreon: https://www.patreon.com/DIYBuilds #DIYBuilds #Woodworking #DIY
Просмотров: 21827 DIY Builds
How to Build a Clamp Rack with Scrap Plywood
 
03:47
Using some scrap plywood I created a few clamp racks to hold all my clamps: squeeze clamps, bar clamps, F-clamps and long reach C-clamps. Support DIY Builds on Patreon: https://www.patreon.com/DIYBuilds Buy a T-shirt to support the channel: https://teespring.com/stores/diy-builds Visit my website for free plans and see viewer builds: http://diybuilds.ca Follow me on Instagram: https://www.instagram.com/diybuilds Follow me on Facebook: https://www.facebook.com/DIYBuilds #DIYBuilds #Woodworking #DIY
Просмотров: 8895 DIY Builds
How to Build a Secret Compartment Box / Puzzle Box
 
06:47
I used a good 4 side piece of 1x4x6 poplar and a small piece of scrap 1/4" pre-finished plywood to make this small trick puzzle box that will keep your secret belongings safe... at least for a little while until they figure it out or smash your box open ;) Buy a T-shirt to support the channel: https://teespring.com/stores/diy-builds Visit my website for free plans and see viewer builds: http://diybuilds.ca Follow me on Instagram: https://www.instagram.com/diybuilds Follow me on Facebook: https://www.facebook.com/DIYBuilds Support DIY Builds on Patreon: https://www.patreon.com/DIYBuilds #DIYBuilds #Woodworking #DIY
Просмотров: 33555 DIY Builds
Pocket Hole Machine Cart with Built in Dust Collection
 
09:29
Using a sheet and a half of 3/4" plywood I made a cart for my home made pocket hole machine that uses the existing on off button to start built in dust collection. The unit has 1 cord to plug in for both the drill and vacuum. Buy a T-shirt to support the channel: https://teespring.com/stores/diy-builds Visit my website for free plans and see viewer builds: http://diybuilds.ca Follow me on Instagram: https://www.instagram.com/diybuilds Follow me on Facebook: https://www.facebook.com/DIYBuilds Support DIY Builds on Patreon: https://www.patreon.com/DIYBuilds #DIYBuilds #Woodworking #DIY
Просмотров: 11549 DIY Builds
Dust Collector Impeller Upgrade - Testing Air flow, Suction, Noise Levels and Current Draw
 
07:18
I bought a replacement impeller for the Rikon 60-200 dust collector for $120 (including S&H) and swapped it out of my stock harbor freight dust collector. The HF impeller is 10" forward facing veins and the Rikon is 12" rear facing veins. The change resulted in a substantial upgrade in performance. Support DIY Builds on Patreon: https://www.patreon.com/DIYBuilds Buy a T-shirt to support the channel: https://teespring.com/stores/diy-builds Visit my website for free plans and see viewer builds: http://diybuilds.ca Follow me on Instagram: https://www.instagram.com/diybuilds Follow me on Facebook: https://www.facebook.com/DIYBuilds #DIYBuilds #Woodworking #DIY
Просмотров: 42083 DIY Builds
Homemade CNC Router Part 1 - Building the Table
 
05:05
This is the first build video of my homemade cnc router in which the subject is the table that supports the unit. The CNC has a half sheet of plywood cut capacity with a maximum thickness allowance of 6". The entire unit cost under $900 to make. A free set of plans and cost breakdown analysis (with links to every product used) is available for download on my website DIYBuilds.ca Support DIY Builds on Patreon: https://www.patreon.com/DIYBuilds Buy a T-shirt to support the channel: https://teespring.com/stores/diy-builds Visit my website for free plans and see viewer builds: http://diybuilds.ca Follow me on Instagram: https://www.instagram.com/diybuilds Follow me on Facebook: https://www.facebook.com/DIYBuilds #DIY #Woodworking #CNC
Просмотров: 17099 DIY Builds
How to Make an End Grain Cutting Board - Gift Idea
 
04:27
Using scraps of maple cherry and walnut that I thicknessed to 3/4" stock I created a custom end grain cutting board that with last a life time. Keep it for yourself or make them as gifts for friends and family. Buy a T-shirt to support the channel: https://teespring.com/stores/diy-builds Visit my website for free plans and see viewer builds: http://diybuilds.ca Follow me on Instagram: https://www.instagram.com/diybuilds Follow me on Facebook: https://www.facebook.com/DIYBuilds Support DIY Builds on Patreon: https://www.patreon.com/DIYBuilds #DIYBuilds #Woodworking #DIY
Просмотров: 4346 DIY Builds
How to Make a Jointer
 
15:11
I bought this power planer for under 50 bucks new and decided to take some scrap MDF and make myself a jointer. It has a fully adjustable infeed table to match the depth of cut of the planer, an on off switch, the ability to use dust collection and you can easily remove it to use as it was intended. I finished it off with some yellow Tremclad paint. Free plans avaliable at my website in the link below. Buy a T-shirt to support the channel: https://teespring.com/stores/diy-builds Visit my website for free plans and see viewer builds: http://diybuilds.ca Follow me on Instagram: https://www.instagram.com/diybuilds Follow me on Facebook: https://www.facebook.com/DIYBuilds Support DIY Builds on Patreon: https://www.patreon.com/DIYBuilds #DIYBuilds #Woodworking #DIY
Просмотров: 1210528 DIY Builds
Building The Ready Shed by Backyard Discovery [SPONSORED]
 
07:12
In this video I show you The Ready Shed by Backyard Discovery, from the delivery, to the disassembly of the crate and putting it all together. To get your own Ready Shed see the link below for the peak or barn style roof. This video is sponsored by The Ready Shed by Backyard Discovery. o The Ready Shed Peak 8’x8’: https://www.amazon.com/Ready-Install-Materials-Primed-Construction/dp/B06XCN18BY/ o The Ready Shed Barn 8’x8’: https://www.amazon.com/Ready-Install-Materials-Primed-Construction/dp/B06XCKNQ9C/ Buy a T-shirt to support the channel: https://teespring.com/stores/diy-builds Visit my website for free plans and see viewer builds: http://diybuilds1.weebly.com/ Follow me on Instagram: https://www.instagram.com/diybuilds Follow me on Facebook: https://www.facebook.com/DIYBuilds Support DIY Builds on Patreon: https://www.patreon.com/DIYBuilds #DIYBuilds #Woodworking #DIY
Просмотров: 16390 DIY Builds
How to Make Long Reach C-Clamps for Under $10 (Strength Test at the End)
 
10:02
Using a 3 foot piece of 7/16" threaded rod, 6 nuts, 4 washers, drywall screws, wood glue and some scrap plywood I made 2 long reach c-clamps. These clamps are simple to build and very strong. Buy a T-shirt to support the channel: https://teespring.com/stores/diy-builds Visit my website for free plans and see viewer builds: http://diybuilds.ca Follow me on Instagram: https://www.instagram.com/diybuilds Follow me on Facebook: https://www.facebook.com/DIYBuilds Support DIY Builds on Patreon: https://www.patreon.com/DIYBuilds #DIYBuilds #Woodworking #DIY
Просмотров: 35358 DIY Builds
How to Make a Router Table
 
18:24
I made a myself a router table that incorporates a safety switch in the front with a receptacle inside so the stock router doesn't have to be modified in any way. It has a dust collection port that can be opened up to accommodate a 4" line and an adjustable fence with built in stop blocks that can be removed and stored on the side. The project uses 3 sheets of 3/4" plywood. A set of plans/cut list can be found on my website. Buy a T-shirt to support the channel: https://teespring.com/stores/diy-builds Visit my website for free plans and see viewer builds: http://diybuilds.ca Follow me on Instagram: https://www.instagram.com/diybuilds Follow me on Facebook: https://www.facebook.com/DIYBuilds Support DIY Builds on Patreon: https://www.patreon.com/DIYBuilds #DIYBuilds #Woodworking #DIY
Просмотров: 309763 DIY Builds
How to Build Simple Garage Storage Shelves / Scrap Wood Storage
 
04:09
Using simple butt joints and some 2x4s and 1/2" construction grade plywood I made super simple and cheap shelving for the garage/shop to serve as my scrap wood storage. Visit my website: http://diybuilds.ca Follow me on Instagram: https://www.instagram.com/diybuilds/ Follow me on Facebook: https://www.facebook.com/DIYBuilds Support DIY Builds on Patreon: https://www.patreon.com/DIYBuilds #DIYBuilds #Woodworking #DIY
Просмотров: 15929 DIY Builds
Drill Press & Sanding Station (Plus Tool Storage)
 
04:16
I used a sheet and a half of plywood ripped to width by the store to 15.75" to create this tool storage unit that I could permanently mount my drill press and 2 stationary sanders to. There are only 2 casters on the bottom as this will rarely be moved. The back was made from a scrap sheet of 1/2" MDF I had around. Visit my website: http://diybuilds1.weebly.com/ Check out my Blog for past projects: http://doityourselfbuilds.blogspot.ca/ Follow me on Instagram: https://www.instagram.com/diybuilds/ Follow me on Facebook: https://www.facebook.com/DIYBuilds Follow me on Twitter: https://twitter.com/DIYBUILDS Support DIY Builds on Patreon: https://www.patreon.com/DIYBuilds #DIYBuilds #Woodworking #DIY
Просмотров: 14705 DIY Builds
First Inlay with my Homemade CNC - 50K Subscribers
 
02:55
This was my first attempt at inlay work on the CNC and I think it turned out extremely well considering what the CNC is made out of and how much it cost tot build. Thank you so much for subscribing and supporting the channel over the lat 2 years. I didn't believe I would ever hit 50k subs but here we are and I'm so grateful. Thank you all. Support DIY Builds on Patreon: https://www.patreon.com/DIYBuilds Buy a T-shirt to support the channel: https://teespring.com/stores/diy-builds Visit my website for free plans and see viewer builds: http://diybuilds.ca Follow me on Instagram: https://www.instagram.com/diybuilds Follow me on Facebook: https://www.facebook.com/DIYBuilds #DIY #Woodworking #CNC
Просмотров: 8609 DIY Builds
Recording Studio Desk (for Glenn Fricker)
 
09:37
Glenn Fricker asked me to make him a custom desk for his recording studio that would incorporate an ergonomical design, storage below and 19" rack mounts protruding from the desk surface. The finish is a black stain (MInwax) and 5 coats of water based Polyurethane. Buy a T-shirt to support the channel: https://teespring.com/stores/diy-builds Visit my website for free plans and see viewer builds: http://diybuilds.ca Follow me on Instagram: https://www.instagram.com/diybuilds Follow me on Facebook: https://www.facebook.com/DIYBuilds Support DIY Builds on Patreon: https://www.patreon.com/DIYBuilds #DIYBuilds #Woodworking #DIY
Просмотров: 33953 DIY Builds
How to Make a Simple Wooden Mallet
 
03:33
I choose to make my mallet out of Oak scraps I had around the shop and to use 4 pieces glued together for the head instead of a solid chunk as it is much easier this way and plenty strong. Visit my website: http://diybuilds1.weebly.com/ Check out my Blog for past projects: http://doityourselfbuilds.blogspot.ca/ Follow me on Instagram: https://www.instagram.com/diybuilds/ Follow me on Facebook: https://www.facebook.com/DIYBuilds Follow me on Twitter: https://twitter.com/DIYBUILDS Support DIY Builds on Patreon: https://www.patreon.com/DIYBuilds #DIYBuilds #Woodworking #DIY
Просмотров: 15731 DIY Builds
How to Build A Do-Nothing Box
 
03:35
I used some scrap of maple and oak to create this simple time wasting device. It uses sliding dove tails to creating a criss-crossing oval pastern. You can waste all your time just pointlessly spinning this device in your hands. I applied a light boiled lin-seed oil finish to this and it really smoothed out the function of it. Visit my website: http://diybuilds1.weebly.com/ Check out my Blog for past projects: http://doityourselfbuilds.blogspot.ca/ Follow me on Instagram: https://www.instagram.com/diybuilds/ Follow me on Facebook: https://www.facebook.com/DIYBuilds Follow me on Twitter: https://twitter.com/DIYBUILDS Support DIY Builds on Patreon: https://www.patreon.com/DIYBuilds #DIYBuilds #Woodworking #DIY
Просмотров: 12581 DIY Builds
Crazy Arrow Bookcase Build
 
04:39
Using 4 1x10x8 pine boards and a bit of 1/4" hard board backer I created this modern looking arrow bookcase. confuse your friends by building your own version by downloading my free plans on my website. Buy a T-shirt to support the channel: https://teespring.com/stores/diy-builds Visit my website for free plans and see viewer builds: http://diybuilds.ca Follow me on Instagram: https://www.instagram.com/diybuilds Follow me on Facebook: https://www.facebook.com/DIYBuilds Support DIY Builds on Patreon: https://www.patreon.com/DIYBuilds #DIYBuilds #Woodworking #DIY
Просмотров: 4154 DIY Builds
Tube Amp Rack (for Glenn Fricker)
 
03:36
Glenn Fricker at Spectre Sound Studios asked me to build him a tube amp rack (on wheels) to go along with the new recording studio desk I made for him. This is the result. Enjoy! Visit my website: http://diybuilds1.weebly.com/ Check out my Blog for past projects: http://doityourselfbuilds.blogspot.ca/ Follow me on Instagram: https://www.instagram.com/diybuilds/ Follow me on Facebook: https://www.facebook.com/DIYBuilds Follow me on Twitter: https://twitter.com/DIYBUILDS Music by: Final Stage https://www.youtube.com/watch?v=HgIBevJ0R0k&index=3&list=PLDz-gHeguf7lOWyPDsG3ipW91txcc4psM Support DIY Builds on Patreon: https://www.patreon.com/DIYBuilds #DIYBuilds #Woodworking #DIY
Просмотров: 6479 DIY Builds
Baby Busy Board
 
03:22
My son is at that age where he wants to touch everything so my wife and I gathered a bunch of old and useless junk around the house and screwed it to the wall. He loves it! Buy a T-shirt to support the channel: https://teespring.com/stores/diy-builds Visit my website for free plans and see viewer builds: http://diybuilds.ca Follow me on Instagram: https://www.instagram.com/diybuilds Follow me on Facebook: https://www.facebook.com/DIYBuilds Support DIY Builds on Patreon: https://www.patreon.com/DIYBuilds #DIYBuilds #Woodworking #DIY
Просмотров: 35008 DIY Builds
How to Build a Leaning Ladder Shelf (Bookshelf)
 
05:06
Using 1x3 select pine boards and 1x10 boards I created this simple DIY leaning ladder shelf that will spruce up any room to display your favourite nick-nacks, books or anything else. It is finished with a Varathane "Carbon Grey" stain and 1 coat of polyurethane. The joinery is screw butt joints on the top of the shelf and pocket hole joinery for the shelves. Support DIY Builds on Patreon: https://www.patreon.com/DIYBuilds Buy a T-shirt to support the channel: https://teespring.com/stores/diy-builds Visit my website for free plans and see viewer builds: http://diybuilds.ca Follow me on Instagram: https://www.instagram.com/diybuilds Follow me on Facebook: https://www.facebook.com/DIYBuilds #DIYBuilds #Woodworking #DIY
Просмотров: 8747 DIY Builds
How to Fix a Broken Chair Leg
 
04:11
This chair leg was broken by tearing out the threaded inserts used in the knock down joinery. I show how to fix it by sawing away the broken wood and replacing it. Buy a T-shirt to support the channel: https://teespring.com/stores/diy-builds Visit my website for free plans and see viewer builds: http://diybuilds1.weebly.com/ Follow me on Instagram: https://www.instagram.com/diybuilds Follow me on Facebook: https://www.facebook.com/DIYBuilds Support DIY Builds on Patreon: https://www.patreon.com/DIYBuilds #DIYBuilds #Woodworking #DIY
Просмотров: 15960 DIY Builds
How to Make a Wood Deck Bench / Adding a Kids Slide to a Deck
 
04:33
Using eight 2x6x16, one 2x8x8 and one 2x4x8 I added this simple bench across the back of my hot tub deck and off to the side added a spot to attach a slide for my sons to use. I forgot to add in a couple finished shots at the end but if you want to see a picture of it you can go to my Instagram page. Support DIY Builds on Patreon: https://www.patreon.com/DIYBuilds Buy a T-shirt to support the channel: https://teespring.com/stores/diy-builds Visit my website for free plans and see viewer builds: http://diybuilds.ca Follow me on Instagram: https://www.instagram.com/diybuilds Follow me on Facebook: https://www.facebook.com/DIYBuilds #DIYBuilds #Woodworking #DIY
Просмотров: 3927 DIY Builds
How to Build a Snowflake Shelf - Gift Idea
 
02:58
Using some select S4S 1x3 pine I made a snow flake shelf for my mom as an early Christmas present. You can find free plans on my website to build one yourself. Buy a T-shirt to support the channel: https://teespring.com/stores/diy-builds Visit my website for free plans and see viewer builds: http://diybuilds1.weebly.com/ Follow me on Instagram: https://www.instagram.com/diybuilds Follow me on Facebook: https://www.facebook.com/DIYBuilds Support DIY Builds on Patreon: https://www.patreon.com/DIYBuilds #DIYBuilds #Woodworking #DIY
Просмотров: 4126 DIY Builds
DIY CNC Router - Calibration and Accuracy Test
 
04:29
In this video we look at how to calibrate the x and y axis and determine just how accurate this plywood monster is. Support DIY Builds on Patreon: https://www.patreon.com/DIYBuilds Buy a T-shirt to support the channel: https://teespring.com/stores/diy-builds Visit my website for free plans and see viewer builds: http://diybuilds.ca Follow me on Instagram: https://www.instagram.com/diybuilds Follow me on Facebook: https://www.facebook.com/DIYBuilds #DIY #Woodworking #Carpentry
Просмотров: 11510 DIY Builds
How to Make a Picture with Frame (With Coves) out of 2x6 Dimensional Lumber
 
05:03
Using some 2x6 dimensional (pine) lumber I made a modern yet classical picture frame and with that style in mind placed a very inspiring piece of art within it. I stained it with a custom walnut/ebony blend and coated it with 3 coats of water based polyurethane. Support DIY Builds on Patreon: https://www.patreon.com/DIYBuilds Buy a T-shirt to support the channel: https://teespring.com/stores/diy-builds Visit my website for free plans and see viewer builds: http://diybuilds.ca Follow me on Instagram: https://www.instagram.com/diybuilds Follow me on Facebook: https://www.facebook.com/DIYBuilds #DIYBuilds #Woodworking #DIY
Просмотров: 4184 DIY Builds
How to Make a Wooden Spatula
 
02:54
Scrap chunk of maple + bandsaw + stationary belt sander = custom wooden spatula for the Mrs. Visit my website: http://diybuilds1.weebly.com/ Check out my Blog for past projects: http://doityourselfbuilds.blogspot.ca/ Follow me on Instagram: https://www.instagram.com/diybuilds/ Follow me on Facebook: https://www.facebook.com/DIYBuilds Follow me on Twitter: https://twitter.com/DIYBUILDS Support DIY Builds on Patreon: https://www.patreon.com/DIYBuilds #DIYBuilds #Woodworking #DIY
Просмотров: 9402 DIY Builds
How to Build a Skill Saw Push Stick - Surprise Ending!
 
03:48
If you want to make a skill saw push stick of your own visit my website for a template to print out. Watch till the end of the video for a special guest appearance. Buy a T-shirt to support the channel: https://teespring.com/stores/diy-builds Visit my website for free plans and see viewer builds: http://diybuilds.ca Follow me on Instagram: https://www.instagram.com/diybuilds Follow me on Facebook: https://www.facebook.com/DIYBuilds Support DIY Builds on Patreon: https://www.patreon.com/DIYBuilds #DIYBuilds #Woodworking #DIY
Просмотров: 11240 DIY Builds
Lightning Side Table - Two 2x4 Challenge
 
07:07
I took the #Two2x4Challenge issued by modernmakerpodcast (Instagram) and by using a 2x4x8 and a 2x4x10 I created an end table that has been brutally electrocuted by a microwave oven transformer to create Lichtenburg figures for a very cool look. Here is a link to the challenge: https://www.instagram.com/p/BSzIcAwFY08/?taken-by=modernmakerpodcast Buy a T-shirt to support the channel: https://teespring.com/stores/diy-builds Visit my website for free plans and see viewer builds: http://diybuilds.ca Follow me on Instagram: https://www.instagram.com/diybuilds Follow me on Facebook: https://www.facebook.com/DIYBuilds Support DIY Builds on Patreon: https://www.patreon.com/DIYBuilds #DIYBuilds #Woodworking #DIY
Просмотров: 17279 DIY Builds
How to Build a Tiny Muskoka Chair (Adirondack Chair) For kids
 
05:17
I built this tiny Maskoka chair for my son to lounge outside on and he absolutly loves it. It took 1 piece of 10by1by8 from homedepot (only $10) to make this and some screws. I have made 1to1 printable plans available on my website so you can easily make your own. Visit my website: http://diybuilds.ca Follow me on Instagram: https://www.instagram.com/diybuilds/ Follow me on Facebook: https://www.facebook.com/DIYBuilds Support DIY Builds on Patreon: https://www.patreon.com/DIYBuilds #DIYBuilds #Woodworking #DIY
Просмотров: 13597 DIY Builds
How to Build a Bathroom Towel Cabinet
 
08:13
Using 1/5 sheets of 5/8" melamine particle board, 1/2 a sheet of 1/4" hard board and a few pieces of 3/4" pine board I created this bathroom towel cabinet for more storage in the room. This came about as we had previously a bidet in that spot but never used it... for good reason... ewwwww. Plans available for free on my website! Buy a T-shirt to support the channel: https://teespring.com/stores/diy-builds Visit my website for free plans and see viewer builds: http://diybuilds1.weebly.com/ Follow me on Instagram: https://www.instagram.com/diybuilds Follow me on Facebook: https://www.facebook.com/DIYBuilds Support DIY Builds on Patreon: https://www.patreon.com/DIYBuilds #DIYBuilds #Woodworking #DIY
Просмотров: 11630 DIY Builds
How to Build a Live Edge Mirror
 
06:49
Using a scrap piece of off-cut from a chunk of black walnut my friend gave me who has a saw mill I created a live edge mirror with bark on the inside and fine milled lumber on the outside. Buy a T-shirt to support the channel: https://teespring.com/stores/diy-builds Visit my website for free plans and see viewer builds: http://diybuilds1.weebly.com/ Follow me on Instagram: https://www.instagram.com/diybuilds Follow me on Facebook: https://www.facebook.com/DIYBuilds Support DIY Builds on Patreon: https://www.patreon.com/DIYBuilds #DIYBuilds #Woodworking #DIY
Просмотров: 5684 DIY Builds
How to Build an Earthquake Coffee Table
 
06:00
I made 2 of these earthquake coffee tables. They are super easy to build and the finished result always impresses anyone who sees it in your living room. Buy a T-shirt to support the channel: https://teespring.com/stores/diy-builds Visit my website for free plans and see viewer builds: http://diybuilds.ca Follow me on Instagram: https://www.instagram.com/diybuilds Follow me on Facebook: https://www.facebook.com/DIYBuilds Support DIY Builds on Patreon: https://www.patreon.com/DIYBuilds #DIYBuilds #Woodworking #DIY
Просмотров: 13279 DIY Builds